• About
  • Industries
    • Water Plants
    • Commercial HVAC
    • Natural Gas
    • Fuel Storage
  • Products
    • Air Separator Tanks
    • Blowdown Tanks
    • Expansion Tanks
    • Air Receiver Tanks
    • Fire Protection Tanks
    • Water Heaters
    • Water Storage Tanks
    • Chill Water / Buffer Tanks
    • Hydropneumatic Tanks
  • Resources
    • ASME Standards
    • Tank Linings
    • Warranties
    • Operations & Maintenance
    • Lifting Instructions
    • Technology
  • Contact
  • Air Separator Tanks
  • Blowdown Tanks
  • Expansion Tanks
  • Air Receiver Tanks
  • Fire Protection Tanks
  • Water Heaters
  • Water Storage Tanks
  • Chill Water / Buffer Tanks
  • Hydropneumatic Tanks
  • Flash Tanks

Blowdown Tanks

Tanks designed to reduce the temperature and pressure of a boiler’s blowdown discharge.

Blowdown Tanks

Our blowdown tanks are fabricated with 3/8” thick heads and shell and are inspected and stamped in accordance with the latest ASME code specifications, under Section VIII, Division 1 for 150 psi design pressure at 300° F. They are also registered with the National Board of Boiler and Pressure Vessel Inspectors.

Each tank includes an internal wear plate, an inlet connection, an outlet connection with internal ell and pipe, a vent connection, a cold water inlet connection, and other connections as shown on our standard drawing.

Each tank also includes a 4″ x 6″ handhole or a 12″ x 16″ manway depending on the size of the tank. If the governing authority requires changes, Wendland can fabricate the custom-designed vessel to your requirements.

Tank exteriors are painted with one coat of our standard shop primer.

GENERAL NOTES

  • See Support section for supports available.
  • Vertical leg dimensions can be changed as required.
  • See Engineer Specification W-800 for a written specification for this tank.
© 2023 Wendland Manufacturing, Inc. | All rights reserved
Site by BMC Bronson Ma Creative