• About
  • Industries
    • Water Plants
    • Commercial HVAC
    • Natural Gas
    • Fuel Storage
  • Products
    • Air Separator Tanks
    • Blowdown Tanks
    • Expansion Tanks
    • Air Receiver Tanks
    • Fire Protection Tanks
    • Water Heaters
    • Water Storage Tanks
    • Chill Water / Buffer Tanks
    • Hydropneumatic Tanks
  • Resources
    • ASME Standards
    • Tank Linings
    • Warranties
    • Operations & Maintenance
    • Lifting Instructions
    • Technology
  • Contact
  • Air Separator Tanks
  • Blowdown Tanks
  • Expansion Tanks
  • Air Receiver Tanks
  • Fire Protection Tanks
  • Water Heaters
  • Water Storage Tanks
  • Chill Water / Buffer Tanks
  • Hydropneumatic Tanks
  • Flash Tanks

Water Storage Tanks

Tanks utilized with boilers, solar heating mediums, or other types of hot-water heating systems.

Water Storage Tanks

Our water storage tanks are utilized with boilers, solar heating mediums, or other types of hot-water heating systems to store domestic water. When sized properly, these tanks are an effective way to store hot water for meeting maximum usage requirements along with normal system needs. As peak hot water demand requirements are critical, we suggest using ASHRAE’s latest guide and data book for the sizing of these tanks.

The hot water storage tank drawings shown here are for customer convenience and are intended as a guide only. We will custom fabricate each vessel to your requirements. We can fabricate the vessels per A.S.M.E. code with stamp or as a Wendland standard pressure tank either code or non-code.

As hot water can be corrosive, we recommend these tanks be internally lined for extended tank life. For interior linings, Wendland recommends Epoxoline or Cementline. Refer to the lining section of our catalog for other available linings. We also require that those tanks used for hot water be installed using dielectric bushings to aid in corrosion prevention.

Wendland Manufacturing can assist you in formulating and writing specifications for your particular hot water storage tank requirements.

GENERAL NOTES

  • If centerline of vessel is on girth seam, openings will be offset 6".
  • See accessory details for alternate supports.
  • Manway is not required on tanks 36" or less unless lined. Inspection couplings will be installed if manway is not required.
  • Vertical legs dimension can be changed as required.
  • See Engineer Specification W-100 for a written specification for this tank.
© 2023 Wendland Manufacturing, Inc. | All rights reserved
Site by BMC Bronson Ma Creative